Ultra Filtration System

Osmosis allows a living cell to select only the correct minerals needed to sustain existence while rejecting of those minerals which would be harmful .It uses a special semi-permeable TFC membrane filter. TFC, or thin film composite filters reject a higher percentage of all dissolved solids, including sodium, the smallest of molecules. The unit changes normal tap water into fine Quality drinking water.

Category: Tag:

WHAT SSC PROVIDE   – REVERSE OSMOSIS PANEL

Osmosis allows a living cell to select only the correct minerals needed to sustain existence while rejecting those minerals which would be harmful. It uses a special semi-permeable TFC membrane filter. TFC, or thin film composite filters reject a higher percentage of all dissolved solids, including sodium, the smallest of molecules. The unit changes normal tap water into fine Quality drinking water. It is important to note that no chemicals are used anywhere in the entire process.

Ultra Filtration System – Accuracy through superior technology.

  • It optimizes wastage.
  • Upgrade the performance.
  • Handling with ease and many more.
  • First, we introduce the Home screen Of the Ultrafiltration system, Green  (.)means HMI Power On.

How to reach the main menu?

Just touch anywhere on the screen.

OPERATOR PANEL

The operator panel is our main menu. Here we can operate our entire program i.e.,

  • Timer Setting
  • IO list
  • Ultrafiltration status
  • Alarm history
  • CIP Manual operation
  • Timer setting screen

Touch on the next screen the TIMER SETTING 2 screen is showing.

Here all the content is editable.

Timer settings are unlocked till the power supply is not disconnected. after the power supply is off the timer settings are automatically locked and saved.

IO LIST

  • Touch on IO LIST
  • INPUT LIST will be open and for OUTPUT LIST press Next (Showing fig 2)

ULTRAFILTRATION STATUS

  • Touch on ULTRA FILTRATION STATUS
  • STATUS LIST will be open and For the operator panel screen press MENU. (like fig 3)

ALARM HISTORY

  • Touch on ALARM HISTORY
  • LIST will be open and For the operator panel screen press MENU. (showing fig 4)
  • ALARM tag will be running continues on
  • Bottom in HMI screen in sequence.

CIP MANUAL OPERATION

  • Touch on CIP MANUAL OPERATION
  • CIP MANUAL OPERATION screen display and For operator panel screen press MENU.
  • For CIP Operation start press CIP START
  • For CIP Operation stop press CIP STOP

All of it showing in Fig 5.

  • Here CIP OPERATION is automatically
  • Stop if we set the CIP TIMER value in
  • TIMER SETTING 2 (e.i., fig 6)
  • If we want to Stop manually we should
  • Touch on CIP STOP Which is highlighted by red (fig 7).

 

Related products

Scroll to Top